ASSET PROTECTION
Proactive protection to keep your high value equipment operating effectively
MAGSHIELD – HELPING PROTECT YOUR ASSETS
Fluid contamination control in high-value heavy equipment and machinery is a widely recognised problem, with ~70% plus fluid contamination driven by ferrous materials – increasing to ~90% upon a component failure. Even at the minute level, ferrous contamination in hydraulics and pressurised fluid systems is problematic and whilst there are multiple causes, each with varying levels of probability and impact, the end result is the same – damage, downtime, and cost.
Filtration using media filters has always been an important component of best practices in fluid contamination control. Whilst effective there are some inherent limitations of media filtration:
- They are specifically designed to only filter particles above a certain design size (usually between 3 and 5 microns) with smaller particles passing through the filter and remaining in the system;
- The holding capacity of these filters is limited, resulting in filters needing to be changed regularly;
- When large quantities of contamination are introduced into the circuit (e.g. component failures), media filters reach capacity and enter bypass mode leaving your system unprotected from that point.
Until now, we’ve become accustomed to “living with it” or operating in an environment where certain tolerance levels are just accepted.
MAGSHIELD's MAGNETIC FILTRATION SYSTEMS
MagShield uses high quality, rare earth magnet filters, engineered specifically for your high value equipment, trucks, and machinery to capture finer and more ferrous contaminants from your key fluid operating systems.
Our extensive range of fluid contaminant removal products are designed to complement and enhance existing media filters and hydraulic filtration systems and come in a variety of fluid reservoir and inline options.
Get in touch with the MagShield Team of filtration and contaminant removal specialists to find the right fit for your application. Prolong the life of your heavy equipment with our range of asset protection filtration solutions.
DISCOVER MAGSHIELD’S ASSET PROTECTION PRODUCTS
BENEFITS OF MAGSHIELD’S ASSET PROTECTION RANGE
Less downtime, greater savings and better productivity for your business.
High capture, low impediment
Our unique design enables it to capture finer and more ferrous particles without impeding the operating effectiveness of the equipment
Easily installation, within minimal ongoing management
Easily and quickly fitted before delivery or at next service interval
Cost effective, life of asset solution
One time investment, typically <0.5% of the cost of the equipment which means it can be easily included to any repairs and maintenance budget
Extra line of protection
An extra line of protection or the ultimate “clean-up” solution in the event of secondary failures
Extensive product range
Ensures that you will find a MagShield product that best fits your machine and reliability objectives
Dean Cryer
Business Development Manager
: +1 780 966 8647
: dean.cryer@magshield.com
Jorge Infanta
Sales Account Manager
: +1 780 909 8232
: jorge.infanta@magshield.com
Stacy Dukart
Sales Account Manager
: +1 780 984 8647
: stacy.dukart@magshield.com
Neil Cropper – Australia
General Manager
: +61 409 269 873
: neil.cropper@magshield.com
Simon Lewis – Australia
Business Development Manager
: +61 455 298 814
: simon.lewis@magshield.com
Barry Erasmus – Australia
Business Development Manager
: +61 472 567 040
: barry.erasmus@magshield.com
Team Contacts 
Client Location 