Mag-Shield®X Magnetic Filtration
Why add Mag-Shield®X ?
Mag-Shield®X is the ideal inline magnetic filtration solution for hydraulic and fluid systems. These high-capacity canister-style filters easily complement your existing filtration and protect your system by removing over 98% of ferrous particles on each circulation, without flow restriction or cavitation. There is no other inline filter available with the same magnetic surface and effectiveness to improve reliability and lower operating costs.
Mag-Shield®X helps you:
- Minimise failure of components like pumps and transmissions
- Protect the system instantly during failures and repairs
- Get greater longevity & performance from OEM filters
- Improve your machine availability
- Lower your maintenance costs
How Mag-Shield®X works
Mag-Shield®X is contained within a traditional filter housing for easy installation and maintenance – simply install alongside your existing filtration system. Rare earth magnets in the multi-rod design work to collect ferrous contamination that the standard OEM media style filters cannot. This product continually protects your recirculating fluid system from normal wear contaminants as well as debris from failing components and repair.
The unique design of Mag-Shield®X allows you to collect the wear material for analysis as part of your condition monitoring program. It’s ideal for heavy machinery, mobile mining equipment, stationary systems and other applications.
EXPLORE MAG-SHIELD®X
Get MAG-SHIELD®X Working For Your Business
THE BENEFITS OF MAG-SHIELD®X INLINE PRE-FILTRATION
Mag-Shield®X gives you cost-effective protection for both normal operation and in the case of component failures.
EXTEND COMPONENT LIFE
As these filters capture ferrous particles that are too small for standard OEM filters to catch, they can significantly improve component life. One client has documented an 18% improvement in their component longevity.
PREVENT LARGER PROBLEMS
Mag-Shield®X could mean the difference between a component failure and a catastrophic system failure. This makes magnetic inline filtration a low-cost investment for peace of mind.
GET BACK TO WORK FASTER
The use of the Mag-Shield®X helps reduce system clean-up time after a failure and allows your machine to get back into service sooner, with instant ferrous filtering.
MINIMISE FOLLOW-ON FAILURES
By capturing iron contamination when a failure occurs and by filtering 100% of the fluid when a machine is restarted following repairs, Mag-Shield®X dramatically reduces secondary hydraulic failures.
REDUCE YOUR REPAIR BILL
Not all failures are preventable. Mag-Shield®X reduces the costly impact of failures by capturing a significantly higher quantity of ferrous contamination than OEM filters alone.
EASY ACCESS AND SERVICE
Mag-Shield®X is contained within a traditional filter housing to allow for easy maintenance and simple installation. It’s also simple to assess collected material.
Case Studies in contamination control
Mag-Shield®X can save your business from the damage and high costs that contamination can otherwise cause. They can also bring ease of mind and support increased growth and revenue. Little wonder that many clients have extended the use of Mag-Shield® over their entire heavy machinery fleets.
Dean Cryer
Business Development Manager
: +1 780 966 8647
: dean.cryer@magshield.com
Jorge Infanta
Sales Account Manager
: +1 780 909 8232
: jorge.infanta@magshield.com
Stacy Dukart
Sales Account Manager
: +1 780 984 8647
: stacy.dukart@magshield.com
Neil Cropper – Australia
General Manager
: +61 409 269 873
: neil.cropper@magshield.com
Murray Laidlaw
Sales Manager
: +61 437 072 396
: murray.laidlaw@magshield.com
Team Contacts 
Client Location